9361375g_omni

Please download to get full document.

View again

of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Categories
Published
Omnidirectional Antennas Vertical Polarization 806– 894 V VPol Omni 806–894 360° 11dBi Type No. Frequency range Polarization Gain Impedance VSWR Intermodulation IM3 Max. power 738 192 Vertical 11 dBi 50 Ω 1.5 739 901 806 – 894 MHz –150 dBc (2 x 43 dBm carrier) 500 W (at 50 °C ambient temperature) 3237 mm 738 192 7° Subject to alteration. 10 3 0 dB Mechanical specifications Input Connector position Weight 738 192 7-16 female Bottom 8.5 kg 51 mm 739 901 7-16 female Top Vertical Pa
  738 192 739 901 Type No. Omnidirectional AntennasVertical Polarization 936.1375/g Subject to alteration. Input 7-16 female 7-16 femaleConnector position Bottom TopWeight 8.5 kgRadome diameter 51 mmWind load 230 N (at 150 km/h)Max. wind velocity 180 km/hPacking size 3516 x 148 x 112 mmHeight 3237 mm 3219 mm Mechanicalspecifications738 192 739 901 Frequency range 806 – 894 MHzPolarization VerticalGain 11 dBiImpedance 50 Ω VSWR < 1.5Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier)Max. power 500 W (at 50 °C ambient temperature) VPol Omni 806–894 360° 11dBi 806–894V Vertical Pattern 3 dB 100 7 ° 3237 mm 738 192 738 192, 739 901 Page 1 of 2 KATHREIN-Werke KG.Anton-Kathrein-Straße 1 – 3.P.O. Box 10 04 44.83004 Rosenheim.Germany.Phone +49 8031 184-0.Fax +49 8031 184-973 Internet: www.kathrein.de  936.1375/g Subject to alteration. Mounting: The antenna can be attached laterally at the tip of a tubular mast of50 – 94 mm diameter with two U-bolt brackets supplied with the antenna(connecting cable runs outside the mast). Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel. Solid, reliable construction: Omnidirectional antennas are often installed at exposed sites onthe top of masts, so special attention has been paid to their mechnicalconstruction.The exceptionally stiff fiberglass tube with low tip deflection will withstandwind velocities of up to 180 km/h. Anti-static protection: All metal parts of the antenna as well as the supplied clamp attachmentare grounded. The inner conductor is capacitively coupled. Lightning protection: The antenna is designed to withstand a lightning current of up to150 KA (impulse: 10/350 µs), according to IEC 62305 parts 1–4 andVDE 0855-300, and thereby fulfils the requirements of lightningprotection class II. Grounding cross-section: 22 mm 2 copper. Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-mental conditions as described in ETS 300 019-1-4 class 4.1 E.The antennas exceed this standard with regard to the following items:– Low temperature: –55 °C– High temperature (dry): +60 °C Environmental tests: Kathrein antennas have passed environmental tests as recommendedin ETS 300 019-2-4. The homogenous design of Kathrein’s antennafamilies use identical modules and materials. Extensive tests have beenperformed on typical samples and modules. Accessories (order separately) 738 908 2 clamps Mast: 94 – 125 mm diameter 2.8 kg 1737 398 Side-mounting bracket Mast: 40 – 105 mm diameter 6.4 kg 1 Type No. Description RemarksWeight Units perapprox. antenna AccessoriesGeneral Information 150 230 104 maximummast top Page 2 of 2 738 192, 739 901Please note: As a result of more stringent legal regulations and judgements regarding product liability, we areobliged to point out certain risks that may arise when products are used under extraordinary operatingconditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and therebyrespects the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused byoscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safetyregulations.The details given in our data sheets have to be followed carefully when installing the antennas andaccessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufacturersmust be obeyed.Any previous datasheet issues have now become invalid. KATHREIN-Werke KG.Anton-Kathrein-Straße 1 – 3.P.O. Box 10 04 44.83004 Rosenheim.Germany.Phone +49 8031 184-0.Fax +49 8031 184-973 Internet: www.kathrein.de
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks